View EAST16084BB1_9010841.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

smd ? b EAST16084BB1 features ? package in 8mm t ape on 7 diameter r eel. ? compatibl e wi th automatic pl acement equipment. ? compatibl e wi th infr ared an d vapor p hase reflow solder proc ess. ? mono -col or type. ? pb -free. ? the produ c t itself will r emain within rohs c ompliant version. ? compliance with eu reach. ?compliance halogen free .(br <900 ppm ,cl <900 ppm , br+cl < 1500 ppm) description ?the east16084 smd led is much smaller than lead frame type components, thus enable s smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ? besides, lightweight makes them ideal for miniature applications. etc. applications ?backlighting in dashboard and switch. ?telecommunication: indicator and backlighting in telephone and fax. ?flat backlight for lcd, switch and symbol. ?general use. page 1 of 11 rev. 0.01
device selection guide chip materials emitted color resin color ingan blue water clear ) param eter symbol rating unit reverse voltage v r 5 v forward current i f 10 ma p eak forward current (duty 1/10 @1khz) i fp 100 ma power dissipation pd 40 mw electrostatic discharge esd hbm 150 v operating temperature t opr - 40 ~ +85 storage temperature tstg - 40 ~ + 90 soldering temperature tsol reflow soldering : 260 for 1 0 sec. hand soldering : 350 for 3 sec. datasheet EAST16084BB1 page 2 of 11 rev. 0.01
electro-optical characteristics (ta=25 ) parameter symbol min. typ. max. unit condition luminous intensity iv 11.5 ----- 28.5 mcd i f = 5 ma vi ewing angle 2 1/2 ----- 1 20 ----- deg peak wavelength p ----- 468 ----- nm dominant wavelength d 465.0 ----- 475.0 nm spectrum radiation bandwidth ----- 2 5 ----- nm forward voltage v f 2.50 ---- 3.10 v reverse current i r ----- ----- 5 0 a v r = 5 v note: 1. tolerance of luminous intensity: 11% 2.tolerance of dominant wavelength 1nm 3. tolerance of forward voltage: 0.1 v datasheet EAST16084BB1 page 3 of 11 rev. 0.01
bin range of luminous intensity bin code min. max. unit condition l1 11.5 14.5 mcd i f = 5 ma l2 14.5 18.0 m 1 18.0 22.5 m2 22.5 28.5 bin range of dom. wavelength bin code min. max. unit condition x 465.0 470.0 nm i f = 5 ma y 470.0 475.0 bin code min. max. unit condition 9 2.50 2.70 v i f = 5 ma 10 2.70 2.90 1 1 2.90 3.10 note: 1.tolerance of luminous intensity: 11% 2.tolerance of dominant wavelength 1nm 3. tolerance of forward voltage: 0.1 v datasheet EAST16084BB1 page 4 of 11 rev. 0.01
typical electro-optical characteristics curves forward voltage v (v) f forward current i (ma) f forward voltage ta=25c forward current vs. ta=25 % 400 relative luminous intensity 0 25 7550 ( 100 550 450 500 600 ) spectrum distribution wavelength (nm) relative luminous intensity ambient temperature t (c -60 1 10 -20-40 0 20 60 40 ) a 10080 100 % ) ( 1000 relative luminous intensity vs. ambient temperature 10 relative luminous intensity 1 10 100 % ) ( 1000 forward current 10 10 i (ma) f ta=25 relative luminous intensity vs forward current forward current derating curve ambient temperature t (c forward current f i (ma) a ) 0.7 0.90.8 1.0 0.4 0.30.5 0.1 0.2 70 0.6 80 90 50 60 40 0 10 ta=25 20 30 radiation diagram datasheet EAST16084BB1 page 5 of 11 rev. 0.01
package dimension note: tolerances unless mentioned 0.1mm. unit = mm datasheet EAST16084BB1 page 6 of 11 rev. 0.01
moisture resistant packing materials label explanation ? cpn: customer s product number ? p/n: product number ? qty: packing quantity ? cat: luminous intensity rank ? hue: chromaticity coordinates & dom. wavelength rank ? ref: forward vol tage rank ? lot no: lot number note: the tolerances unless mentioned is 0.1mm ,unit = mm datasheet EAST16084BB1 page 7 of 11 rev. 0.01
carrier tape dimensions: loaded quantity 3000 pcs per reel note: the tolerances unless mentioned is 0.1mm ,unit = mm moisture resistant packaging label desiccant label aluminum moisture-proof bag datasheet EAST16084BB1 page 8 of 11 rev. 0.01
precautions for use 1. over-current-proof customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2. 1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package: the leds should be kept at 30 or l ess and 90%rh or less. 2.3 after opening the package: the led's floor life is 1 year under 30 or less and 6 0% rh or less. if unused leds remain, it should be stored in moisture proof packages 2. 4 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 5 for 24 hours. 3. soldering condition 3.1 pb -free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board. 4.soldering iron each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damage of the product is often started at the time of the hand solder. 5.repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double-head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing. pre-heating 150~200 c 60~120sec. above 217 c 60~150sec. 260c max. 10sec. max. 6c/sec.max. above255 c 30sec.max. 3c/sec.max. datasheet EAST16084BB1 page 9 of 11 rev. 0.01
application restrictions high reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. if you have any concerns, please contact everlight before using this product in your application. this specification guarantees the quality and performance of the product as an individual component. do not use this product beyond the specification described in this document. datasheet EAST16084BB1 page 10 of 11 rev. 0.01
disclaimer 1. everlight reserves the right(s) on the adjustment of product material mix for the specification. 2. the p roduct meet s everlight published specification for a period of twelve (12 ) months from date of shipment. 3. the graphs shown in this datasheet are representing typical data only and do not show guaranteed values. 4. when using this product, please observe the absolute maximum ratings and the instructions for us ing outlined in these specification sheets. everlight assumes no responsibility for any damage resulting from the use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 5. these specification sheets include materials protected under copyright of everlight. reproduction in any form is prohibited without obtaining everlight s prior consent . 6. this product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving applications or any other application which can result i n human injury or death. please contact authorized everlight sales agent for special application request. datasheet EAST16084BB1 page 11 of 11 rev. 0.01

▲Up To Search▲

Price & Availability of EAST16084BB1

	To Download EAST16084BB1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .